• British Sports Cars
    Specialty parts over 50 years old.
    Parts for collectible pieces of history.
    Special parts to enhance performance.
    Our markets include:
    Britain, New Zealand, and Australia.
  • Design and Manufacture
    British Frame and Engine also designs and
    manufactures certain parts to handle any
    sales in specialized markets.
    A lot of these parts are sold to the racing
    outfits, providing them with better performance
    for the rigorous strain on the track.
  • From the TR2 to the TR6
    Specifically we provide for the Triumph
    from the TR2 to the TR6. We purchase the
    items from manufacturers in Britain,
    New Zealand, and Australia, to provide for
    sports racers, restoration, as well as
    individual owners. In order to insure we can
    get what you need, we also purchase
    from Moss Motors.
  • New Products
    Rocker pedestal stud kits with ARP
    studs and mini head nuts to reduce the
    chance of a broken stud. Kit $ 40.00

    6 blade impeller water pumps for
    TR2 - TR4A Each $ 140.00

Parts at British Frame & Engine

All prices subject to change without notice!

Prices may vary from those shown.

TR 2 TR 3 TR 3A TR4 TR4A ENGINE PARTS

TR250, TR6, & GT6 ENGINE PARTS

Chassis TR2-TR3A-TR4-TR4A-TR250-TR6 PARTS

  TR 2 TR 3 TR 3A TR4 TR4A ENGINE PARTS   PRICES
1. 87mm Rebuilder piston and liner kit w/ cast pistons set 400.00
2. 87mm or 89mm Piston & Liner Kit w/forged Weisco pistons, thicker racing sleeves, special taper bore pins, locks and Deves piston rings set 1,080.00
3. High performance Grant piston rings 87mm or 89mm set 45.00
4. Racing quality sleeves supplied in 87mm each 125.00
5. Racing sleeves bored to 89mm - .004 hone to 3.504" each 125.00
6. Racing camshafts on a good core each 105.00
   3 grinds 4 cyl TR 260o - 282o   170.00
   4 grinds 4 cyl TR 300o - 320o   180.00
    core charge   60.00
7. Tappets - Phosphated with drain hole each 11.00
8. Tappets - Special Materials .875" each 12.75
9. Tappets bore liners to be used with above each 11.50
10. 3/8 chrome-moly push rod set (the latest and best in high performance units. Available in stock length, .100", .150", .250") set 85.00
11. High performance valve spring set set 75.00
12. Alloy valve spring retainers each 7.00
13. Titanium valve spring retainers each 32.00
14. Alloy rocker arm pedestals with support for shaft ends set 150.00
15. Rocker arm shaft (4 cyl) Tuftrided w/Plugs each 46.00
16. Rocker arm bushings (16 required) each 3.20
17. Rocker arm adjuster (8 required) each 5.60
18. Pedestal stud and nut kits (ARP studs and mini head nuts) set 30.00
19. Rocker arm spacers (to replace springs on rocker shaft) set 35.00
20. Timing chain 4 cyl each 12.00
21. Timing chain tentioner each 11.50
22. Rear crank conversion (seal only) each 20.00
23. Conversion kit to change crank seal to lip seal (some machine work on crank required) kit 160.00
24. Conversion to harmonic dampener for crankshaft type II (includes dampener unit, alloy water pump pulley, special timing cover seal, etc.) kit 420.00
25. Conversion to harmonic dampener for crankshaft type I (includes dampener unit, alloy water pump pulley, special timing cover seal, etc.) kit 255.00
26. Dampener kit (seal only) each 15.50
27. Timing cover seal (stock) each 9.50
28. Repair kit (spedee sleeve) For stock crank hub kit 31.95
29. High Capacity Water Pump w/6 blade impeller each 64.00
30. Finned alloy oil sump (black anodized or unfinished) each 600.00
31. Finned magnesium sump (black anodized or unfinished) each 700.00
32. Finned alloy sump (shorter length for ground clearance) each 600.00
33. ARP Rod Bolts for stock rods (8 per set) set 120.00
34. Special performance tall grade 8 head nuts (10 per set) set 20.00
35. ARP Stud Kit (cylinder head) special materials with nuts and washers set 139.00
36. Clearanced oil pump (exchange) for better pressure (rotors extra if needed) each 75.00
37. Rod bearings (Available in STD, .010", .020", .030") set 35.00
38. Main bearings (Available in STD, .010", .020", .030") set 65.00
39. Thrust washers (STD & .005" only) set 10.00
40. Cam bearing set STD set 30.00
41. Shim steel head gasket (87and 89mm bores) each 125.00
42. Payen AE 330 copper & composition head gasket each 34.00
       
44.  Engine conversion gasket sets (lower end) Manuf. by Payen set 50.00
45. Sump gasket each 14.00
46. TR3- TR4A Manifold gaskets pair 13.00
47. Standard inlet valves each 15.75
48. Standard exhaust valves (TR2- TR4 with 3/8" stems) each 19.95
49. Standard exhaust valves (TR4A with 5/16" stems) each 19.95
50. High performance inlet valve (stainless - head diameter .050" oversize. Valve shaped for maximum flow) each 28.00
51. High performance inlet valve (stainless - head diameter .110" oversize. Valve shaped for maximum flow) each 28.00
52.  High performance exhaust valve (stainless - head diameter 1.42" oversize and shaped for maximum flow with 5/16" stem. Requires use of conversion guide in TR2- TR4)  each 28.00
53. Racing Stainless inlet valve .100" oversize (swirl polish on underside of valve) each 28.00
54. Silicon bronze valve guide - inlet TR2 - TR4 each 5.50
55. Silicon bronze valve guide - exhaust TR2 - TR4 with 3/8" stems each 5.50
56. Silicon bronze valve guide (to convert from 3/8" stem exhaust to 5/16") each 5.50
57. Silicon bronze valve guide - exhaust - TR4A with 5/16" stems each 5.50
58. Hard seats for exhaust valves - TR4A with standard head each 7.00
59. Triumph stainless steel 4 tube extractor (fits both long & short starters) each 550.00
60. Alloy water pump housing each 220.00
61. Mallory dual point distributor each 260.00
62. "RB", "RC" & other performance S.U. needles   P.O.R
63. Gasket works head gasket sealant each 13.00
64. Adjustable cam sprocket TR2 - TR4A each 178.30
65. Adapter to spin-on oil filter (Purelator TR2, TR3, TR3A, TR4, TR4A each 27.00
66. Adapter to remote oil cooler w/ fittings (works w/ adapter above) each 60.00
67. Rebuild kits for original AC fuel pumps kit 22.00
68. Compound high torque starters TR2 - early TR3 each 305.00
69. Compound high torque starter TR3A - TR4A each 258.00
70. New 6 Bladed water pump w/ alloy housing, alloy impeller & alloy press on pulley each 380.00
  TR250, TR6 & GT6 ENGINE PARTS   PRICES
1. Reground TR250 - TR6 camshafts (282deg &292deg) on a good core each 180.00
2. High performance valve spring sets (use original retainers) set 100.00
3. Deves piston rings in STD, .010", .020", .040", .060" each 75.00
4. Timing chain (2 row) each 16.00
5. Head gasket set (for the late TR6 after engine CC75000 with recess) set 71.95
6. Head gasket set (TR250 - TR6 through 1971) set 62.50
7. EE350 conversion gasket set set 33.95
8. Rod bearing sets (STD, .010", .020") set 41.00
9. Main bearings sets (STD, .010", .020") set 45.95
10. Thrusts (STD & .005") set 11.20
11. Heavy Duty thrust bearings (bronze & steel, std. & .014") set 80.00
12. Cast alloy finned sump for 6 cyl (black anodized) each 520.00
13. Sump baffle for above each 36.00
14. Silicon bronze valve guide inlet each 5.50
15. Silicon bronze valve guide exhaust each 5.50
16. Chrome-moly pushrods 5/16" tubular (stock length & .150" for severly milled heads) set 120.00
17. Rocker arm shaft (6cyl) each 65.00
18. Tappet (chilled iron) each 9.00
19. TR250 - TR6 finned alloy valve cover each 180.00
20. Alloy water pump housing for TR6 each 280.00
21. High efficiency pump with 6 impeller blades each 160.00
22. Alloy water pump pulleys each 100.00
23. 6-cyl oversize stainless inlet valves 1.500" each 29.95
24. 6-cyl oversize stainless exhaust valves 1.300" each 28.00
25. Replacement cam bearing sets (block machining required) set 53.00
26. Adjustable cam sprocket (TR6) each 190.00
27. Forged piston sets with pins and rings (TR6 & GT6) each 920.00
  Chassis TR2-TR3A-TR4-TR250-TR6 PARTS   PRICES
1. Salisbury no spin center section w/ conversion (TR3 - TR6) each 1800.00
2. Qauife limited slip differential each 1340.00
3. 4.10 differential gears (TR2 - TR6) set 450.00
4. Finned alloy diff cover (extra capacity) each 300.00
5. Slack limiting top cover for worm and peg steering (original cover to be as core) each 75.00
6. Nylatron & stainless rear spring locating kit each 75.00
7. Nylatron & stainless upper control arm bushing kit (TR2 - TR6) each 60.00
8. Nylatron 7 stainless lower control arm bushing kit (TR4A - TR6) each 75.00
9. Bronze & stainless steel silent bloc bush replacement for steering connecting rod pair 100.00
10. Urethane upper control arm bush (TR2 - TR6) set 40.00
11. Urethane lower control arm bush (TR4A - TR6) set 48.00
12. Urethane & steel upper control arm kit (spitfire and GT6) set 50.00
13. Urethane steering rack inserts pair (TR4 - TR6) set 16.00
14. Urethane rear trailing bush kit (TR4A - TR6) set 60.00
15 Close ratio gears for TR3B - TR6 set 630.00
16 4.30 differential gears (TR2 - TR6) pair 430.00

Contact Information


Phone: 626.419.2786
e-Mail: bfeparts@aol.com


Good reviews and referrals are greatly appreciated! Find us at: